Addressable Input/Output Module Intelligent Module OM611

Receives the programmed orders from the control panel and controls2groups of the output signals in order to setup the equipments

 Product Overview

Applied with advanced MCU single-chip micro-processor, Surface Mount Technology and 2 wires non-polarity Input, the Output Module OM611 possesses 2 kinds of encoding methods both auto-encoding of the controller and electro-encoding of the address encoder. It also has the function of auto-measuring Voltage between both ends of the module. This module is used together with the Intelligent Fire Alarm Control Panel OZH4800. The auto-encoding method can take reference to the Instruction of the Control Panel. And the electro-encoding method can take reference to the Instruction of the electronic encoder.

The OM611 Output Module receives the programmed orders from the Control Panel and controls 2 groups of the Output Setup signals: All-time ON signal and All-time OFF signal, in order to setup the field linkage equipments. Then it receives 2 Feedback signals sent by the linkage equipments after action and transmits the signals of Setup and Feedback back to the Control Panel showing the location of the signals, meanwhile lighting the indicator.(Blinking green at normal checking time and Blinking red continuously when Setup and Feedback)

 Specifications

Operating Voltage: Bus line DC24V, Distributing line DC24V

Consuming Current of Relay Setup: < 15mA

Standby Current: <0.3mA

Alarm Current: <0.6mA

Capacity of the Interface: DC24V, 1A

Range of the address: 1~192

Size: 96×65×37mm (length × width × height)

Wires: two Bus lines (ZX,ZX), two distributing lines

Applying Environment:

Temperature: -10°C~+5°C         Relative humidity≤95%(40°C±2°C)

Addressable Input/Output Module Intelligent Module OM611